Commercial Fire Systems Packet

Permit Applications will only be accepted between the hours of 8:00 A.M. to 11:30 A.M.
These Applications are to be submitted online at: https://aca-oregon.accela.com/oregon/
On the permit application you must provide all JOB SITE INFORMATION.
The permit application must be completed in its entirety, where a section of the application doesn’t apply you must indicate (N/A).
Please provide valuation of the project.
A permit with plans will be required for all fire alarm, fire sprinkler, fire line and fire suppression system work. Provide plans designed by a qualified person, illustrating calculations, device locations & all cut sheets.

FIRE ALARMS:
The system must be designed under the current adopted edition of NFPA 72 & other applicable codes.

5 Devices or less can be submitted with an affidavit. You must include floor plan showing location of devices added or moved, the building permit application & completed affidavit. Make sure to include a comment on the online form that this is an affidavit.
Over 5 devices require full submittal.
Fire alarm control unit/panel or communicator installation requires full submittal.

FIRE SPRINKLERS:
The system must be designed under the current adopted edition of NFPA 13/13R & other applicable codes.

10 Heads or less can be submitted with an affidavit. You must include floor plan showing location of heads added or moved, the building permit application & completed affidavit. Make sure to include a comment on the online form that this is an affidavit.
Over 10 heads require full submittal.

UNDERGROUND FIRE LINES:
For underground fire line, provide plans from the vault inward. The system must be designed under the current adopted edition of NFPA 14 & other applicable codes.

HOOD SUPPRESSION SYSTEMS:
Provide plans illustrating the site with the pull station location. The system must be designed under the current adopted edition of NFPA 96 & other applicable codes.

PLEASE NOTE: PRIOR TO SCHEDULING INSPECTIONS, YOU MUST EMAIL THE

FIRE DEPARTMENT AT: [email protected]

Commercial Fire Systems Packet

File Attachments